1. Thermostat: is it set to Heat, and above room temperature? Replace the batteries if it has them.
  2. Breaker: check the furnace breaker in your panel.
  3. Furnace switch: there’s usually a light-style switch on or near the furnace. Make sure it’s on.
  4. Filter: a clogged filter can make the furnace shut itself off. Replace it.
  5. Door panel: the furnace won’t run if the front panel isn’t fully seated; a safety switch stops it.
  6. Vent pipes outside: high-efficiency furnaces have white PVC pipes on an outside wall. Snow or ice blocking them will shut the furnace down. This is very common in Utah. Clear them gently.
  7. Condensate drain: high-efficiency units drain water through a small tube. If it’s clogged or frozen, the furnace may not start.

Tip: many furnaces have a small blinking light visible through a window in the panel. Write down the blink pattern; it helps your technician.

When to Call a Pro

  • You smell gas. Leave the house and call your gas company from outside.
  • The furnace starts and then shuts off repeatedly
  • You hear banging, screeching, or rattling
  • Nothing on this list fixed it

RATHER HAVE A PRO DO IT?

Our technicians handle this every day for homes and businesses across Utah.

Book Now or call 801.266.3361

Safety first: turn off power or gas before working on equipment. If you smell gas, leave the building and call your gas company’s emergency line from outside. If you’re ever unsure, stop and call a licensed pro.

Book Now