A toilet that runs or refills on its own is wasting water and money. The cause is almost always inside the tank.

First, Find the Cause

Take the tank lid off and flush. Watch where the water goes.

Fix 1: Adjust the Chain

If the flapper chain is too tight, the flapper can’t seal. Leave a little slack.

Fix 2: Replace the Flapper

Put a few drops of food coloring in the tank and wait 15 minutes without flushing. If color shows up in the bowl, the flapper is leaking. Shut off the supply valve, flush to drain the tank, and swap in a matching flapper. They’re inexpensive and sold at any hardware store.

Fix 3: Lower the Water Level

If water is spilling into the overflow tube, adjust the float on the fill valve so the water stops about an inch below the top of the tube.

When to Call a Pro

  • The fill valve hisses or won’t shut off
  • Water is leaking at the base or from the supply line
  • The shutoff valve won’t turn or leaks
  • Commercial flush valves (flushometers) in restrooms

RATHER HAVE A PRO DO IT?

Our technicians handle this every day for homes and businesses across Utah.

Book Now or call 801.266.3361

Safety first: turn off power or gas before working on equipment. If you smell gas, leave the building and call your gas company’s emergency line from outside. If you’re ever unsure, stop and call a licensed pro.

Book Now